Info: 'After removing bad zips (if any), mailing is too small for bulk/presort rates. Do you want to sort it anyway?'
DITL_305_Out of Memory.txt
Items: (3 entries)
0:
Bounds: x1=85, y1=68, x2=165, y2=88
Type: 4
Info: 'Quit'
1:
Bounds: x1=65, y1=9, x2=246, y2=57
Type: -120
Info: 'Out of memory. Quit, then use Get Info to increase memory by at least K.'
2:
Bounds: x1=199, y1=41, x2=227, y2=57
Type: -120
Info: '^0'
DITL_304_Too Many Address.txt
Items: (2 entries)
0:
Bounds: x1=86, y1=75, x2=166, y2=95
Type: 4
Info: 'Quit'
1:
Bounds: x1=69, y1=4, x2=246, y2=68
Type: -120
Info: 'You have tried to load more than 32,766 zip codes, exceeding the limit of the program.'
DITL_303_retry.txt
Items: (3 entries)
0:
Bounds: x1=30, y1=72, x2=110, y2=92
Type: 4
Info: 'Try again'
1:
Bounds: x1=140, y1=72, x2=220, y2=92
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=13, x2=244, y2=66
Type: -120
Info: '^0'
DITL_302_four-line alert.txt
Items: (2 entries)
0:
Bounds: x1=85, y1=75, x2=165, y2=95
Type: 4
Info: 'OK'
1:
Bounds: x1=63, y1=4, x2=247, y2=69
Type: -120
Info: '^0'
DITL_301_three-line alert.txt
Items: (2 entries)
0:
Bounds: x1=85, y1=68, x2=165, y2=88
Type: 4
Info: 'OK'
1:
Bounds: x1=65, y1=7, x2=246, y2=56
Type: -120
Info: '^0'
DITL_300_two-line alert.txt
Items: (2 entries)
0:
Bounds: x1=85, y1=68, x2=165, y2=88
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=17, x2=248, y2=54
Type: -120
Info: '^0'
DITL_221_Nag3 Screen.txt
Items: (6 entries)
0:
Bounds: x1=258, y1=123, x2=338, y2=143
Type: 4
Info: 'OK'
1:
Bounds: x1=15, y1=124, x2=240, y2=140
Type: 16
Info: ''
2:
Bounds: x1=253, y1=118, x2=343, y2=148
Type: -64
Info: ' ╩'
3:
Bounds: x1=2, y1=36, x2=347, y2=116
Type: -64
Info: '/'
4:
Bounds: x1=16, y1=5, x2=48, y2=37
Type: -96
Info: ' '
5:
Bounds: x1=60, y1=10, x2=314, y2=26
Type: -120
Info: 'You are using this software illegally!'
DITL_220_Nag2 Screen.txt
Items: (6 entries)
0:
Bounds: x1=258, y1=123, x2=338, y2=143
Type: 4
Info: 'OK'
1:
Bounds: x1=15, y1=124, x2=240, y2=140
Type: 16
Info: ''
2:
Bounds: x1=253, y1=118, x2=343, y2=148
Type: -64
Info: ' ╩'
3:
Bounds: x1=2, y1=36, x2=347, y2=116
Type: -64
Info: '.'
4:
Bounds: x1=16, y1=5, x2=48, y2=37
Type: -96
Info: ' '
5:
Bounds: x1=60, y1=10, x2=334, y2=26
Type: -120
Info: 'It's time you registered your software!'
DITL_219_Nag1 Screen.txt
Items: (6 entries)
0:
Bounds: x1=258, y1=123, x2=338, y2=143
Type: 4
Info: 'OK'
1:
Bounds: x1=15, y1=124, x2=240, y2=140
Type: 16
Info: ''
2:
Bounds: x1=253, y1=118, x2=343, y2=148
Type: -64
Info: ' ╩'
3:
Bounds: x1=2, y1=36, x2=347, y2=116
Type: -64
Info: '-'
4:
Bounds: x1=16, y1=5, x2=48, y2=37
Type: -96
Info: ' '
5:
Bounds: x1=60, y1=10, x2=303, y2=26
Type: -120
Info: 'Thank you for trying Postage $aver!'
DITL_218_Load More Files.txt
Items: (7 entries)
0:
Bounds: x1=202, y1=118, x2=312, y2=138
Type: 4
Info: 'Load Another'
1:
Bounds: x1=202, y1=47, x2=312, y2=67
Type: 4
Info: ''
2:
Bounds: x1=202, y1=82, x2=312, y2=102
Type: 4
Info: 'Cancel'
3:
Bounds: x1=196, y1=113, x2=318, y2=143
Type: -64
Info: ' ╩'
4:
Bounds: x1=91, y1=9, x2=261, y2=25
Type: -120
Info: '^0'
5:
Bounds: x1=13, y1=49, x2=182, y2=65
Type: -120
Info: 'Choose what to do next:'
6:
Bounds: x1=25, y1=9, x2=57, y2=41
Type: -96
Info: ' '
DITL_217_Edit state locations.txt
Items: (13 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=10, y1=40, x2=280, y2=56
Type: 16
Info: ''
3:
Bounds: x1=10, y1=61, x2=126, y2=77
Type: 8
Info: ''
4:
Bounds: x1=163, y1=61, x2=280, y2=77
Type: 8
Info: ''
5:
Bounds: x1=289, y1=18, x2=342, y2=36
Type: 4
Info: 'next'
6:
Bounds: x1=289, y1=42, x2=342, y2=60
Type: 4
Info: 'prev'
7:
Bounds: x1=289, y1=67, x2=342, y2=85
Type: 4
Info: 'new'
8:
Bounds: x1=289, y1=91, x2=342, y2=109
Type: 4
Info: 'quit'
9:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
10:
Bounds: x1=8, y1=20, x2=158, y2=35
Type: -120
Info: 'Select a label to edit:'
11:
Bounds: x1=8, y1=82, x2=287, y2=115
Type: -120
Info: 'Press SAVE to record changes and see the list of zips for this label.'
12:
Bounds: x1=79, y1=2, x2=274, y2=18
Type: -120
Info: 'Zip Codes Within Each State'
DITL_216_Edit DBMC Labels.txt
Items: (13 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=10, y1=40, x2=280, y2=56
Type: 16
Info: ''
3:
Bounds: x1=10, y1=61, x2=126, y2=77
Type: 8
Info: ''
4:
Bounds: x1=163, y1=61, x2=280, y2=77
Type: 8
Info: ''
5:
Bounds: x1=289, y1=18, x2=342, y2=36
Type: 4
Info: 'next'
6:
Bounds: x1=289, y1=42, x2=342, y2=60
Type: 4
Info: 'prev'
7:
Bounds: x1=289, y1=67, x2=342, y2=85
Type: 4
Info: 'new'
8:
Bounds: x1=289, y1=91, x2=342, y2=109
Type: 4
Info: 'quit'
9:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
10:
Bounds: x1=8, y1=20, x2=158, y2=35
Type: -120
Info: 'Select a label to edit:'
11:
Bounds: x1=8, y1=82, x2=287, y2=115
Type: -120
Info: 'Press SAVE to record changes and see the list of zips for this label.'
12:
Bounds: x1=78, y1=2, x2=273, y2=18
Type: -120
Info: 'Destination Bulk Mail Centers'
DITL_215_Edit mixed state Labels.txt
Items: (13 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=10, y1=40, x2=280, y2=56
Type: 16
Info: ''
3:
Bounds: x1=10, y1=61, x2=126, y2=77
Type: 8
Info: ''
4:
Bounds: x1=163, y1=61, x2=280, y2=77
Type: 16
Info: ''
5:
Bounds: x1=289, y1=18, x2=342, y2=36
Type: 4
Info: 'next'
6:
Bounds: x1=289, y1=42, x2=342, y2=60
Type: 4
Info: 'prev'
7:
Bounds: x1=289, y1=67, x2=342, y2=85
Type: 4
Info: 'new'
8:
Bounds: x1=289, y1=91, x2=342, y2=109
Type: 4
Info: 'quit'
9:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
10:
Bounds: x1=8, y1=20, x2=158, y2=35
Type: -120
Info: 'Select a label to edit:'
11:
Bounds: x1=8, y1=82, x2=287, y2=115
Type: -120
Info: 'Press SAVE to record changes and see the list of zips for this label.'
12:
Bounds: x1=95, y1=2, x2=258, y2=17
Type: -120
Info: 'Mixed State Sack Labels'
DITL_214_Edit state Labels.txt
Items: (13 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=10, y1=40, x2=280, y2=56
Type: 16
Info: ''
3:
Bounds: x1=10, y1=61, x2=126, y2=77
Type: 16
Info: ''
4:
Bounds: x1=163, y1=61, x2=280, y2=77
Type: 16
Info: ''
5:
Bounds: x1=289, y1=18, x2=342, y2=36
Type: 4
Info: 'next'
6:
Bounds: x1=289, y1=42, x2=342, y2=60
Type: 4
Info: 'prev'
7:
Bounds: x1=289, y1=67, x2=342, y2=85
Type: 4
Info: 'new'
8:
Bounds: x1=289, y1=91, x2=342, y2=109
Type: 4
Info: 'quit'
9:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
10:
Bounds: x1=8, y1=20, x2=158, y2=35
Type: -120
Info: 'Select a label to edit:'
11:
Bounds: x1=8, y1=82, x2=287, y2=115
Type: -120
Info: 'Press SAVE to record changes and see the list of zips for this label.'
12:
Bounds: x1=115, y1=2, x2=237, y2=17
Type: -120
Info: 'State Sack Labels'
DITL_213_Edit scf Labels.txt
Items: (13 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=10, y1=40, x2=280, y2=56
Type: 16
Info: ''
3:
Bounds: x1=10, y1=61, x2=126, y2=77
Type: 8
Info: ''
4:
Bounds: x1=163, y1=61, x2=280, y2=77
Type: 8
Info: ''
5:
Bounds: x1=289, y1=18, x2=342, y2=36
Type: 4
Info: 'next'
6:
Bounds: x1=289, y1=42, x2=342, y2=60
Type: 4
Info: 'prev'
7:
Bounds: x1=289, y1=67, x2=342, y2=85
Type: 4
Info: 'new'
8:
Bounds: x1=289, y1=91, x2=342, y2=109
Type: 4
Info: 'quit'
9:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
10:
Bounds: x1=8, y1=20, x2=158, y2=35
Type: -120
Info: 'Select a label to edit:'
11:
Bounds: x1=8, y1=82, x2=287, y2=115
Type: -120
Info: 'Press SAVE to record changes and see the list of zips for this label.'
12:
Bounds: x1=123, y1=2, x2=230, y2=17
Type: -120
Info: 'SCF Sack Labels'
DITL_212_Edit tD Labels.txt
Items: (13 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=10, y1=40, x2=280, y2=56
Type: 16
Info: ''
3:
Bounds: x1=10, y1=61, x2=126, y2=77
Type: 8
Info: ''
4:
Bounds: x1=163, y1=61, x2=280, y2=77
Type: 8
Info: ''
5:
Bounds: x1=289, y1=18, x2=342, y2=36
Type: 4
Info: 'next'
6:
Bounds: x1=289, y1=42, x2=342, y2=60
Type: 4
Info: 'prev'
7:
Bounds: x1=289, y1=67, x2=342, y2=85
Type: 4
Info: 'new'
8:
Bounds: x1=289, y1=91, x2=342, y2=109
Type: 4
Info: 'quit'
9:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
10:
Bounds: x1=8, y1=20, x2=158, y2=35
Type: -120
Info: 'Select a label to edit:'
11:
Bounds: x1=8, y1=82, x2=287, y2=115
Type: -120
Info: 'Press SAVE to record changes and see the list of zips for this label.'
12:
Bounds: x1=58, y1=2, x2=293, y2=17
Type: -120
Info: 'Three-Digit Sacks and Unique Cities'
DITL_211_preference Dlog.txt
Items: (9 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'OK'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=3, y1=35, x2=107, y2=51
Type: 5
Info: 'state name.'
3:
Bounds: x1=130, y1=35, x2=224, y2=51
Type: 5
Info: 'city name.'
4:
Bounds: x1=3, y1=62, x2=350, y2=80
Type: 5
Info: 'Separate home SCF mail from other mixed states.'
5:
Bounds: x1=3, y1=89, x2=143, y2=105
Type: 5
Info: 'Create output file.'
6:
Bounds: x1=153, y1=89, x2=336, y2=105
Type: 5
Info: 'Use standard file names.'
7:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
8:
Bounds: x1=6, y1=1, x2=341, y2=33
Type: -120
Info: 'When sorting, bad zip codes will always be skipped. Also skip if zip code does not match:'
DITL_210_field Dlog.txt
Items: (13 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Try Again'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Give Up'
2:
Bounds: x1=300, y1=15, x2=334, y2=29
Type: 16
Info: ''
3:
Bounds: x1=300, y1=40, x2=334, y2=54
Type: 16
Info: ''
4:
Bounds: x1=300, y1=65, x2=334, y2=79
Type: 16
Info: ''
5:
Bounds: x1=300, y1=90, x2=334, y2=104
Type: 16
Info: ''
6:
Bounds: x1=262, y1=40, x2=296, y2=56
Type: -120
Info: 'City:'
7:
Bounds: x1=254, y1=65, x2=296, y2=81
Type: -120
Info: 'State:'
8:
Bounds: x1=267, y1=15, x2=296, y2=31
Type: -120
Info: 'Zip:'
9:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
10:
Bounds: x1=10, y1=2, x2=243, y2=115
Type: -120
Info: 'If the wrong data was showing for city, state or zip, you may be able to correct this by entering correct field numbers in the boxes to the right. (For example, if "city" is the 4th field in your data file, enter "4" in the "city" box.)'
11:
Bounds: x1=253, y1=84, x2=296, y2=99
Type: -120
Info: 'City &'
12:
Bounds: x1=254, y1=99, x2=296, y2=115
Type: -120
Info: 'State:'
DITL_209_mailer Dlog.txt
Items: (18 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'OK'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=52, y1=22, x2=182, y2=36
Type: 16
Info: ''
3:
Bounds: x1=239, y1=22, x2=265, y2=37
Type: 16
Info: ''
4:
Bounds: x1=304, y1=22, x2=346, y2=37
Type: 16
Info: ''
5:
Bounds: x1=3, y1=62, x2=258, y2=78
Type: 6
Info: 'a local carrier station'
6:
Bounds: x1=3, y1=80, x2=258, y2=96
Type: 6
Info: ''
7:
Bounds: x1=3, y1=98, x2=258, y2=114
Type: 6
Info: ''
8:
Bounds: x1=260, y1=47, x2=344, y2=64
Type: 6
Info: 'Regular'
9:
Bounds: x1=260, y1=64, x2=349, y2=82
Type: 6
Info: 'Non-profit'
10:
Bounds: x1=260, y1=85, x2=323, y2=102
Type: 6
Info: 'Letter'
11:
Bounds: x1=260, y1=102, x2=306, y2=119
Type: 6
Info: 'Flat'
12:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
13:
Bounds: x1=6, y1=1, x2=317, y2=17
Type: -120
Info: 'Mailer's home post office:'
14:
Bounds: x1=6, y1=21, x2=42, y2=37
Type: -120
Info: 'City:'
15:
Bounds: x1=271, y1=22, x2=299, y2=37
Type: -120
Info: 'Zip:'
16:
Bounds: x1=6, y1=44, x2=160, y2=60
Type: -120
Info: 'Mail will be sent from:'
17:
Bounds: x1=189, y1=21, x2=232, y2=37
Type: -120
Info: 'State:'
DITL_208_pswd Dlog.txt
Items: (6 entries)
0:
Bounds: x1=63, y1=115, x2=143, y2=135
Type: 4
Info: 'Continue'
1:
Bounds: x1=207, y1=115, x2=287, y2=135
Type: 4
Info: 'Cancel'
2:
Bounds: x1=134, y1=81, x2=256, y2=97
Type: 16
Info: ''
3:
Bounds: x1=80, y1=7, x2=339, y2=71
Type: -120
Info: ''
4:
Bounds: x1=27, y1=15, x2=67, y2=55
Type: -96
Info: ' '
5:
Bounds: x1=58, y1=110, x2=148, y2=140
Type: -64
Info: ' ╩'
DITL_207_ThirdClRates.txt
Items: (28 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=92, y1=50, x2=129, y2=66
Type: 16
Info: ''
3:
Bounds: x1=135, y1=50, x2=172, y2=66
Type: 16
Info: ''
4:
Bounds: x1=221, y1=50, x2=258, y2=66
Type: 16
Info: ''
5:
Bounds: x1=264, y1=50, x2=301, y2=66
Type: 16
Info: ''
6:
Bounds: x1=92, y1=73, x2=129, y2=89
Type: 16
Info: ''
7:
Bounds: x1=135, y1=73, x2=172, y2=89
Type: 16
Info: ''
8:
Bounds: x1=221, y1=73, x2=258, y2=89
Type: 16
Info: ''
9:
Bounds: x1=264, y1=73, x2=301, y2=89
Type: 16
Info: ''
10:
Bounds: x1=92, y1=96, x2=129, y2=112
Type: 16
Info: ''
11:
Bounds: x1=135, y1=96, x2=172, y2=112
Type: 16
Info: ''
12:
Bounds: x1=221, y1=96, x2=258, y2=112
Type: 16
Info: ''
13:
Bounds: x1=264, y1=96, x2=301, y2=112
Type: 16
Info: ''
14:
Bounds: x1=0, y1=1, x2=351, y2=16
Type: -120
Info: '^0'
15:
Bounds: x1=93, y1=30, x2=130, y2=45
Type: -120
Info: 'Basic'
16:
Bounds: x1=23, y1=50, x2=58, y2=66
Type: -120
Info: 'None'
17:
Bounds: x1=25, y1=74, x2=56, y2=90
Type: -120
Info: 'BMC'
18:
Bounds: x1=28, y1=96, x2=53, y2=112
Type: -120
Info: 'SCF'
19:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
20:
Bounds: x1=4, y1=36, x2=77, y2=51
Type: -120
Info: '__________'
21:
Bounds: x1=9, y1=30, x2=72, y2=45
Type: -120
Info: 'Discount'
22:
Bounds: x1=20, y1=16, x2=60, y2=33
Type: -120
Info: 'Entry'
23:
Bounds: x1=141, y1=30, x2=168, y2=45
Type: -120
Info: '3/5'
24:
Bounds: x1=268, y1=30, x2=295, y2=45
Type: -120
Info: '3/5'
25:
Bounds: x1=222, y1=30, x2=259, y2=45
Type: -120
Info: 'Basic'
26:
Bounds: x1=89, y1=17, x2=176, y2=32
Type: -120
Info: 'Letter-sized'
27:
Bounds: x1=225, y1=17, x2=296, y2=32
Type: -120
Info: 'Flat-sized'
DITL_206_Edit State Exceps.txt
Items: (13 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=77, y1=40, x2=155, y2=56
Type: 16
Info: ''
3:
Bounds: x1=228, y1=82, x2=278, y2=98
Type: 16
Info: ''
4:
Bounds: x1=165, y1=38, x2=282, y2=54
Type: 8
Info: ''
5:
Bounds: x1=289, y1=18, x2=342, y2=36
Type: 4
Info: 'next'
6:
Bounds: x1=289, y1=42, x2=342, y2=60
Type: 4
Info: 'prev'
7:
Bounds: x1=289, y1=67, x2=342, y2=85
Type: 4
Info: 'new'
8:
Bounds: x1=289, y1=91, x2=342, y2=109
Type: 4
Info: 'quit'
9:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
10:
Bounds: x1=9, y1=41, x2=71, y2=56
Type: -120
Info: 'Zip Code:'
11:
Bounds: x1=8, y1=82, x2=220, y2=98
Type: -120
Info: 'State or Territory Abbreviation:'
12:
Bounds: x1=76, y1=2, x2=274, y2=17
Type: -120
Info: 'Exceptions to State Locations'
DITL_205_Edit Label Zips Unique.txt
Items: (8 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=71, y1=14, x2=346, y2=30
Type: -120
Info: ''
3:
Bounds: x1=8, y1=43, x2=338, y2=84
Type: 16
Info: ''
4:
Bounds: x1=8, y1=93, x2=120, y2=109
Type: -120
Info: 'Unique City Zips:'
5:
Bounds: x1=126, y1=93, x2=314, y2=109
Type: 16
Info: ''
6:
Bounds: x1=8, y1=14, x2=70, y2=31
Type: -120
Info: 'Zips for:'
7:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
DITL_204_Edit Label Zips.txt
Items: (6 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'Save'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Revert'
2:
Bounds: x1=71, y1=14, x2=346, y2=30
Type: -120
Info: ''
3:
Bounds: x1=8, y1=43, x2=338, y2=84
Type: 16
Info: ''
4:
Bounds: x1=8, y1=14, x2=70, y2=31
Type: -120
Info: 'Zips for:'
5:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
DITL_203_FieldVerify.txt
Items: (9 entries)
0:
Bounds: x1=57, y1=122, x2=147, y2=142
Type: 4
Info: 'OK'
1:
Bounds: x1=203, y1=122, x2=293, y2=142
Type: 4
Info: 'Not OK'
2:
Bounds: x1=52, y1=117, x2=152, y2=147
Type: -64
Info: ' ╩'
3:
Bounds: x1=8, y1=22, x2=338, y2=37
Type: -120
Info: 'File Name: ^0'
4:
Bounds: x1=8, y1=41, x2=340, y2=56
Type: -120
Info: 'Addresses: ^1'
5:
Bounds: x1=8, y1=59, x2=149, y2=74
Type: -120
Info: 'First Address in File:'
6:
Bounds: x1=23, y1=77, x2=338, y2=94
Type: -120
Info: 'City: ^2'
7:
Bounds: x1=22, y1=95, x2=342, y2=111
Type: -120
Info: 'State: ^3'
8:
Bounds: x1=33, y1=3, x2=320, y2=20
Type: -120
Info: 'Please verify that the following is correct:'
DITL_202_welcome Dlog.txt
Items: (6 entries)
0:
Bounds: x1=135, y1=125, x2=215, y2=145
Type: 4
Info: 'OK'
1:
Bounds: x1=130, y1=120, x2=220, y2=150
Type: -64
Info: ' ╩'
2:
Bounds: x1=4, y1=54, x2=349, y2=119
Type: -120
Info: 'If you register this copy of Postage $aver for Mac, you'll unlock extra features and receive technical support and postal file updates for a full year at no extra charge. Choose "Register" from the menu.'
3:
Bounds: x1=11, y1=3, x2=59, y2=51
Type: -96
Info: ' '
4:
Bounds: x1=113, y1=9, x2=256, y2=27
Type: -120
Info: 'Thank you for giving'
5:
Bounds: x1=88, y1=31, x2=281, y2=48
Type: -120
Info: 'Postage $aver for Mac a try!'
DITL_201_FieldHelp.txt
Items: (4 entries)
0:
Bounds: x1=130, y1=122, x2=220, y2=142
Type: 4
Info: 'OK'
1:
Bounds: x1=125, y1=117, x2=225, y2=147
Type: -64
Info: ' ╩'
2:
Bounds: x1=5, y1=1, x2=346, y2=68
Type: -120
Info: 'Ñ If the number of addresses or the file type was incorrect, Postage $aver cannot properly read this file. Either the file is not one of the types Postage $aver can read, or the file is damaged.'
3:
Bounds: x1=5, y1=65, x2=345, y2=113
Type: -120
Info: 'Ñ If the "first address" information was incorrect, use the next screen to tell Postage $aver which fields hold which data items.'
DITL_150.txt
Items: (3 entries)
0:
Bounds: x1=296, y1=76, x2=376, y2=96
Type: 4
Info: 'Stop'
1:
Bounds: x1=192, y1=76, x2=272, y2=96
Type: 4
Info: 'Continue'
2:
Bounds: x1=64, y1=12, x2=376, y2=64
Type: -120
Info: '^0^1^2'
DITL_132.txt
Items: (4 entries)
0:
Bounds: x1=272, y1=56, x2=352, y2=76
Type: 4
Info: 'Save'
1:
Bounds: x1=68, y1=56, x2=148, y2=76
Type: 4
Info: 'Don╒t Save'
2:
Bounds: x1=176, y1=56, x2=256, y2=76
Type: 4
Info: 'Cancel'
3:
Bounds: x1=68, y1=8, x2=354, y2=44
Type: -120
Info: 'Save changes to ╥^0╙ before ^1?'
DITL_130.txt
Items: (2 entries)
0:
Bounds: x1=204, y1=104, x2=284, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=12, x2=288, y2=92
Type: -120
Info: 'Not enough memory!Try closing some documents or increasing the amount of RAM available to FutureBASIC¬.'